Gigaset S540 IP User Manual Download Page 68

Page: 68 / 136

Base station settings

Gigaset S450 IP LBA / IM-Nord_en / A31008-M1713-R221-1-7619 / settings_bs_hs_pabx.fm / 31.10.06

ion 4,

.09.

2005

Base station settings

The base station settings are carried out

using a registered Gigaset S45 handset.

Protecting against unauthorised
access

Protect the system settings of the base sta-

tion with a PIN known only to yourself.

The system PIN is one of the items you

must enter when registering and deregis-

tering a handset, changing the VoIP set-

tings or restoring to factory settings.

Changing the system PIN

You will have to enter the system PIN e.g.

when you register a handset with the base

station, change the VoIP settings or start

the Web configurator.
You can change the base station's 4-digit

default system PIN ("0000") to a 4-digit

system PIN known only to yourself.

Settings

Base

System PIN

Enter current system PIN and

press

§OK§

Enter new system PIN.

Scroll to the

Re-enter PIN:

line.

Now re-enter the new system

PIN and press

§OK§

For security reasons, "****" is displayed

instead of the system PIN.

Press

and

hold

(idle status).

Restoring the base station to
factory settings

Resetting the base station via the

menu

The individual settings are reset. Only the

date and time and the system PIN are

retained.

All handset remain registered.

Settings

Base

Base Reset

Enter the system PIN and press

§OK§

§Yes§

Press the display key to

confirm.

Resetting the base station using a key

on the base station

All individual settings and the system PIN

are reset. The system PIN is "0000" again.

Handsets will be deregistered.

Remove the cable connections from

the base station to the router (page 11)

and fixed network (page 11).

Remove the base station mains unit

from the socket (page 11).

Press and hold

the registration/paging

key (page 1).

Plug the mains unit back into the power

socket.

Press and hold the registration/paging

key (at least 2 sec.).

Release the registration/paging key.

The base station has now been reset.

Activating/deactivating music
on hold

Settings

Base

Music on hold

Select and press

§OK§

to activate

or deactivate music on hold

(

= on).

Summary of Contents for S540 IP









































































































































Search results

Summary of Contents for S540 IP

Reviews:

Related manuals for S540 IP

Brands by name

Popular brands

Gigaset S540 IP, User Manual

Search results

Summary of Contents for S540 IP

Reviews:

Related manuals for S540 IP

Brands by name

Popular brands