Gigaset S540 IP User Manual Download Page 67

Page: 67 / 136

Setting the handset

Gigaset S450 IP LBA / IM-Nord_en / A31008-M1713-R221-1-7619 / settings_bs_hs_pabx.fm / 31.10.06

ion 4,

.09.

2005

Setting the alarm clock

Precondition:

The date and time have

already been set (page 9).

Activating/deactivating the alarm

clock and setting the wake-up time

Alarm Clock

Change multiple line input:

Activation:

Select

Off

Time:

Enter the wake-up time in 4-digit for-

mat.

Melody:

Select melody.

Volume:

Set the volume (1-6).

Save changes (page 104).

You will see the

icon.

A wake-up call with the selected ringer

melody is signalled on the handset.

The wake up call sounds for 60 seconds.

The display shows

Alarm Clock

. If no key is

pressed, the wake-up call is repeated

twice at five minute intervals and then

switched off.
During a call, the wake-up call is signalled

by a short tone.

Deactivating the wake-up call/

repeating after a pause (snooze mode)

Precondition

: A wake-up call is sounding.

§OFF§

Press the display key. The

wake-up call is deactivated.

§Snooze§

Press the display key or any

key. The wake-up call is deacti-

vated and then repeated after

5 minutes. After the second

repetition the wake-up call is

deactivated completely.

Restoring the handset default
settings

You can reset any individual settings and

changes that you have made. This will not

affect entries in the directory, call-by-call

list, calls list, SMS lists or the handset's

registration to the base station.

Handset

Reset Handset

§Yes§

Press the display key.

You can cancel the restoring

process by pressing

or the

display key

§No§

Press

and

hold

(idle status).

Summary of Contents for S540 IP









































































































































Search results

Summary of Contents for S540 IP

Reviews:

Related manuals for S540 IP

Brands by name

Popular brands

Gigaset S540 IP, User Manual

Search results

Summary of Contents for S540 IP

Reviews:

Related manuals for S540 IP

Brands by name

Popular brands