12
V
e
rsio
n 2,
06
.0
8.
201
0 / M
o
d
u
leV
e
rs
io
n 1.
0
Working with the Gigaset N720 SPK PRO
Gigaset N720 SPK PRO / LUG IE-UK_IM en / A31008-XXXXX-XXXX-X-XX / mess_kit.fm / 7/2/20
Operating the measuring handset
The measuring handsets
•
Switch on automatically when they are placed in the charger
•
Are already registered to the measuring base station on delivery
•
Are already in metering mode on delivery.
Display in metering mode
In metering mode, the display shows the current status values of the connection to the base station.
The values are updated at brief intervals. You can change this measuring interval (
Display in idle mode
The display shows the following information in idle status:
Otherwise the following information is displayed:
You will find detailed information on evaluating the measurement results in the Gigaset N870 IP
PRO Site Planning and Measurement Guide.
This section only describes the functions of the handsets relevant for measurements.
For information on the standard functions of the Gigaset S650H PRO handset, see the
user guide for the device. See the product page at gigasetpro.com.
Values for determining the connection quality:
RSSI value
value. Base station signal reception
strength with the best reception in
Acceptable value: –20 to -70 dBm.
Units for signal strength
Fr. quality
. Percentage rate of the
packages received without error in the last
measuring interval.
Acceptable value: 95 – 100%
Frequency: 1
Slot pair: 04
RPN: 50 hex
Fr. quality: 100%
Calls
Frequency
. Carrier frequency of the signal received. Value range: 0 – 9.
Slot pair
used (0 – 11)
Time slot for the reception channel on which the measurement was performed.
Note:
During the transition in the connection status, value 15
is occasionally displayed.
RPN
(Radio Fixed Part Number)
ID of the base station to which the handset is connected. The value is displayed
in hexadecimal format.
