97
Operating the Gigaset N300A IP base answering machine
Gigaset N300/N300A IP / GBR / A31008-M2214-L101-2-7619 / answering_m.fm / 16.07.13
V
e
rsion 4, 16.0
9
.2005
A status message is shown in the handset's idle display for every answering
machine that is assigned a receive connection (example):
If the message memory is full and
Answer & record
or
Alternating
mode has been
selected, you will first be asked to delete old messages. The answering machine is
activated as soon as you have deleted old messages.
If there is no time available, the answering machine changes from
Alternating
mode to
Answer & record
mode until the time is available again.
Recording announcements/
advisory messages
The phone is supplied with pre-recorded announcements for answer and record
mode and for answer only mode. If a personal announcement has not been
recorded, the relevant pre-recorded announcement is used.
You can record your own personal announcement for answer and record mode and
answer only mode for each answering machine.
v
¢
Ì
¢
Announcements
¢
Rec. Announcement
/
Rec. Advisory Msg.
q
If several answering machines are assigned to the handset, select the
answering machine and press
§OK§
.
§OK§
Press the display key to start the recording.
The speaker mode is activated.
You hear the ready tone (short tone).
¤
Now say your announcement (at least 3 seconds).
§End§
Press the display key to end the recording.
Use
a
or
§Back§
to cancel recording and
§OK§
to restart the recording process.
After recording, the announcement is played back for you to check. You can re-
record the announcement with
§New§
.
i
V
07:15
INT 1
14 Oct
AM 1+2 on
AM 3 off
Calls
SMS
•
Please note
A registered handset can only manage answering machines that have at least
one common receive connection with the handset.
