9
Installing the Gigaset HC450 door intercom system
Gigaset HC450 / en / A31008-M1799-R101-2-7619 / Starting.fm / 08.10.2008
Ve
rs
io
n 4, 16.0
9.20
05
Connecting a door opener (optional)
The door opener is connected to the
appropriate jack of the door intercom
using a 2-core cable and the blue
clamping plug.
Labelling nameplates
u
Label the enclosed nameplates using a
waterproof pen. Insert them in the
recesses in the doorbell keys.
u
Position the doorbell key cover on the
doorbell key from above and then apply
gentle pressure at the top and bottom.
u
Replacing nameplates: Insert a small
screwdriver at an angle in the narrow
notch on either side of the doorbell key
cover. Carefully lever off the cover.
Remove the nameplate.
Mounting the HC450 control unit
Requirements
The following requirements for mounting
must be fulfilled:
u
The HC450 control unit contains a
DECT radio module. This module must
be mounted within the base station's
radio range (typically around 30 m
indoors). Check the range using the
handset before fixing the control unit.
If a connection from a DECT handset to
the DECT base station is possible at the
designated location (field strength dis-
play shows at least one bar or a call of
long duration is possible with satisfac-
tory quality), you can mount the con-
trol unit here. If there is no connection
to the base station at the designated
mounting location, the range can be
Door intercom
Door opener
Light
Actuator
ETS
Control unit
Cable plug
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
