Gigaset Gigaset SX761 dsl Manual Download

Page: 14 / 118

First steps

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / device_761.fm / 06.10.2008

Schabl

one 2

005_0

7_2

The LEDs (from left to right) have the following functions:

LED

State

Status

Power

On (green)

The Gigaset SX761 dsl is connected to the mains.

Off

The Gigaset SX761 dsl is disconnected from the mains.

ADSL

A DSL connection is established.

Flashing

The DSL line is being synchronised. The synchronisation

phases are shown as slow flashing (registering) and fast

flashing (training).
If no DSL cable is connected, the LED will flash at uniform

intervals.

Off

DSL is deactivated.

Online

Connection to the Internet has been established.

Off

There is no Internet connection.

LAN1 –

LAN4

A device is connected to the relevant LAN port.

Flashing

The relevant LAN port is sending or receiving data (traffic).

Off

There is no device connected.

VoIP

At least one port is configured for VoIP and VoIP access is

registered with the provider.

Flashing

A call is currently being made via the Internet.

Off

There is currently no connection for Internet telephony or no

VoIP port has been configured.

Phone 1/

Phone 2

The receiver of the phone connected to the port has been

lifted.

Flashing

The phone is ringing and a call is being received or a call is

being conducted.

Off

No phone is connected or the connection is idle.

Summary of Contents for Gigaset SX761 dsl























































































































Search results

Summary of Contents for Gigaset SX761 dsl

Reviews:

Related manuals for Gigaset SX761 dsl

Brands by name

Popular brands

Gigaset Gigaset SX761 dsl, Manual

Search results

Summary of Contents for Gigaset SX761 dsl

Reviews:

Related manuals for Gigaset SX761 dsl

Brands by name

Popular brands