Gigaset Gigaser SL 88 User Manual And Safety Precautions Download Page 40

Page: 40 / 74

Handset operation

Gigaset 4010 Micro, CHINA, A31008-G4010-B222-1-7619

mobilt_an.fm

26.05.04

Handset operation

You can register and operate up to four handsets at

your Gigaset SL 88 base station.

Registering handsets

In order for a handset to work it must be registered to

your base. Handsets must be registered manually.

The

handset that comes with your Gigaset SL 88 is al-

ready registered to the base in order to guarantee

immediate operation.

Manual registration

A handset can only be registered to one Gigaset base

station at a time.

Step 1: On the Handset

Press Menu.

åååååååååååååååååååååååååååååååå

H/Set Settings

[

Scroll to H/Set Settings and confirm.

åååååååååååååååååååååååååååååååå

Reg. Handset

[

Scroll to Reg. Handset and confirm.

[

Select the base station (

is recommended un-

less you are registering your handset to an additional

base).

[

Enter the PIN (factory setting: 0000).

Step 2: Rear side of the base station

Hold down the Page/Registration key on the back side

of the base station for approximately 5 seconds.
When the handset has been successfully registered,

the intercom number is shown (for example, “INT1”).
If all internal handset numbers are assigned, the inter-

com number 4 is reassigned. The handset that has

been registered under number 4 will be deregistered.
It is possible to assign a different internal number (see

page 36) or a different internal name (see page 36) to a

handset later.

. . .

Base 1

Summary of Contents for Gigaser SL 88








































































Search results

Summary of Contents for Gigaser SL 88

Reviews:

Related manuals for Gigaser SL 88

Brands by name

Popular brands

Gigaset Gigaser SL 88, User Manual And Safety Precautions

Search results

Summary of Contents for Gigaser SL 88

Reviews:

Related manuals for Gigaser SL 88

Brands by name

Popular brands