10
Te
mplat
e
G
o
, V
e
rs
ion 1
, 01.
07
.2
014
/ M
odu
leV
e
rs
ion 1
.0
Handset
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / starting_GO.fm / 11/8/17
¤
Turn locking disc clockwise to the end stop
.
The locking disc is closed once the markings on
the disc are aligned with those on the cover
.
Re-opening the battery cover
¤
Turn the locking disc anti-clockwise to the end
stop
(approx. 20°) and remove
.
¤
Place your fingernail in the notch on the side
between the cover and the casing
.
Remove
the cover
.
Charging the batteries
¤
Charge the batteries fully prior to first use in the
charging cradle.
The batteries are fully charged when the power icon
disappears from the display.
Attaching the belt clip
The handset has notches on each side for attaching
the belt clip.
•
Attaching the belt clip:
Press the belt clip onto
the back of the handset so that the tabs on the
belt clip click into place in the notches.
•
Removing the belt clip:
Press the centre of the
belt clip firmly with your right thumb.
Push the
nail of your left thumb up between the clip and
the casing.
Slide the clip upwards to remove.
6
5
5
6
8
9
10
7
7
8
9
10
7.5 h
Batteries may heat up during charging. This is not dangerous.
After a time, the charge capacity of the battery will decrease for technical reasons.
Handsets contained in the package have already been registered to the base. In the
event that a handset is not registered however, (indicated by "
Please register
handset
"), register the handset manually (
