Te
mplat
e
M
odu
le
, V
e
rs
io
n 1.
2,
11
.0
9.
201
8,
Questions and answers
Gigaset E560A / LUG US en / A31008-M2728-R301-1-7619 / appendix_legal_Whale nach Widex.fm / 1/21/19
52
en
fr es
Consultation call, call swapping, conference not possible.
•
These functions that can be executed on the device must be provided and enabled by the network
provider. Operation can vary from one network provider to another.
Contact your network provider
Volume of the handset (earpiece volume) too quiet
•
The volume is at the lowest level
¥
Change the earpiece volume setting (
¥
Change the handset position on the ear
Handsfree volume too quiet
•
The volume is at the lowest level
Change the handsfree volume setting (
You hear a tone during operation
•
Action has failed/invalid input
Repeat the process. Read the display and refer to the user guide
•
The batteries are empty
Charge the batteries (
•
The system PIN you have entered is incorrect
Re-enter the system PIN or reset (
You hear a tone during the call
•
The batteries are empty
Charge the batteries (
Forgotten system PIN
•
Reset the system PIN to 0000 (
Error tone sounds after system PIN prompt
•
The system PIN you have entered is incorrect
Re-enter the system PIN or reset (
The device has come into contact with liquid
•
Allow the device to dry.
Contact with liquid (
The emergency function could not be configured
•
You have not saved any emergency numbers
Save at least one emergency number (
•
The emergency function is not activated
Activate the emergency function (
•
The emergency function only works when the device is directly connected to the network or to a PABX
that does not require "R" or "P" for network assignment
Emergency function direct dial key (
The receiver of an emergency call does not pick up
•
In some PABX, acceptance of the emergency call by pressing the key 5 does not divert this to the
connected handset. The emergency function is not possible in this case, as a conversation cannot be held.
Test the emergency function after set-up with each receiver entered.