10
First steps
Gigaset E490/E495 / GBR / A31008-M2105-L101-2-7619 / starting.fm / 04.01.2011
V
e
rsion 4, 16.0
9
.2005
Setting up the handset for use
The display and control key are protected by a plastic film.
Please remove the protective film!
Inserting the batteries and closing the battery cover
Warning
Only use the rechargeable batteries recommended by Gigaset Communica-
tions GmbH (
¢
page 62), i.e. never use conventional (non-rechargeable) bat-
teries, as this could result in significant health risks and personal injury. For
example, the outer casing of the batteries could be damaged or the batteries
could explode. The phone could also malfunction or be damaged as a result of
using batteries that are not of the recommended type.
¤
Insert the batteries the right way round.
The polarity is indicated in/on the battery
compartment.
¤
Hold the battery cover at a slight
angle and insert the bottom into
the casing first
a
.
¤
Then press the cover
b
until it
clicks into place.
b
¤
Insert the lock ring or belt clip into
the battery cover as shown (at an
angle of approx. 20°).
Pay attention to the arrow mark-
ings on the lock ring.
¤
Turn the lock ring or belt clip
clockwise to the end stop.
The lock ring is closed once the
markings on the ring are aligned
with those on the cover.
a
