Gigaset DX800A Instruction Manual Download Page 69

Page: 69 / 177

Using directories

Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / directories.fm / 06.09.11

rsion 4, 16.0

.2005

Deactivating anniversaries

(Select entry)

§View§ §Edit§

Press the display keys one after
the other.

Scroll to the

Anniversary:

line.

Select

Off

§Save§

Press the display key.

Anniversary reminder call

In idle status

, a reminder call is shown in the

display of the handset

(

page 4)

and sig-

nalled with the selected ringer.

You can:

§OFF§

Press the display key to
acknowledge and end the
reminder call.

When you are on the phone,

a reminder call

is indicated on the handset with a

single

advisory tone.

Anniversaries that are indicated during a call
and are not acknowledged are entered in
the

Missed Alarms

list

(page 95)

Using online directories

You can use public online directories (online
directories and classified directories e.g.,
"Yellow Pages") depending on your provider.

You can configure the online directories you
wish to use via the Web configurator.

Opening an online/classified
directory

Prerequisite:

The base is in idle status.

Press and

hold

Or:

Contacts

Network Directory

This opens the list of online directories. Pro-
vider-specific names appear in the display.

Select a directory (online direc-
tory or classified directory) from
the list and press

§OK§

This establishes a connection to the online
directory or the classified directory.

If there is only one online directory available,
a connection is immediately established if
you press and

hold

down the control key.

Please note

A time must be specified for reminder
calls. If you have selected the visual sig-
nal, you do not have to specify the time.

Exclusion of liability

Gigaset Communications GmbH assumes
no guarantee or liability for the availability
of this service. The service may be discon-
tinued at any time.

Please note

You can also establish a connection to
the online directory as follows:

When the base is in idle status,
dial

1#91

and then pick up the

receiver

To establish a connection to the clas-
sified directory, dial

2#91

To establish a connection to the
Gigaset.net directory, dial

1188#9

Calls to the online directory are always
free of charge.

Summary of Contents for DX800A


















































































































































































Search results

Summary of Contents for DX800A

Reviews:

Related manuals for DX800A

Brands by name

Popular brands

Gigaset DX800A, Instruction Manual

Search results

Summary of Contents for DX800A

Reviews:

Related manuals for DX800A

Brands by name

Popular brands