Gigaset CX203 isdn Manual Download

Page: 90 / 168

Date and Time

Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / time_calendar.fm / 08.10.2003

Setting appointments

You can use your base station to remind yourself of an appointment. To do this, you

have to save the times.

Setting an appointment

Cancelling an appointment

Open the menu.

Reminder

Select the menu item and confirm.

Press the display key to open the submenu.

Change reminder

Select the menu item and confirm.

Enter the date and time. If necessary skip settings

that are already correct using

u v

If necessary, in the

12 hours

display use the display

keys

and

to switch between

and

Confirm.

Enter message (up to 16 characters) and confirm.

The entry is stored.

Hold

down (back to idle status).

◆

If you do not enter a message,

Reminder

will appear in the display at

the relevant time.

◆

How to change the volume and melody is explained starting on

page 112.

◆

An appointment will only be displayed only if the base station is in idle

status. During a call or automatic last number redial, the appointment

is not displayed. In this case, the appointment alarm is made once the

base station has returned to idle status.

◆

The appointment cannot be signalled during a power failure. In this

case, the appointment alarm is made as soon as the time has been

reset on the system (page 85).

Open the menu.

Reminder

Select the menu item and confirm.

Press the display key to open the submenu.

Delete reminder

Select the menu item and confirm. The entry is

deleted.

Hold

down (back to idle status).

Summary of Contents for CX203 isdn









































































































































































Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands

Gigaset CX203 isdn, Manual

Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands