Gigaset CX203 isdn Manual Download

Page: 100 / 168

System settings

Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / settings_bs.fm / 08.10.2003

Setting up the list of send MSNs for the next call

You can set up your base station so that after lifting the receiver or pressing the

handsfree key

a list of all available send MSNs is displayed.

By factory default,

MSN next call

is not activated.

Setting up a busy signal when the MSN is being used (Busy on Busy)

This setting allows callers to get a busy signal immediately when an external call is

already being made on this MSN, independent of the setting

Call waiting

By factory default, the function is not set.

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 90).

Setup user

Select the menu item and confirm.

Setup device

Select the menu item and confirm. The list of

entered internal numbers is displayed.

Int.11

Select internal number of the terminal and open the

submenu, e .g.

Int.11

MSN next call

Select the menu item and confirm (

‰

= activated).

Hold

down (back to idle status).

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 90).

ISDN settings

Select the menu item and confirm.

Busy on busy

Select and confirm (

‰

activated).

Hold

down (back to idle status).

Summary of Contents for CX203 isdn









































































































































































Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands

Gigaset CX203 isdn, Manual

Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands