Gigaset CL390, User Manual

Page: 30 / 52

Te
mplat
e
M
odu
le
, V
e
rs
ion 1.
3,
1
1
.04.
20
19,
Additional functions
Gigaset CL390-CL390A / LUG BE-NL en / A31008-M2902-M201-1-3F43 / applications.fm / 10/24/19
30
Deactivate the baby monitor remotely
¤
Accept alarm call Press keys
The baby monitor is deactivated and the handset is in idle status. The baby monitor settings
on the handset (e.g. no ringtone) will remain activated until you press the display key
Off .
ECO DECT
The device range is set to maximum by default. This guarantees the best connection between
handset and base. In idle mode, the handset does not transmit (it is radiation-free). Only the base
maintains contact with the handset, using weak wireless signals. During a call, the transmit
power automatically adapts to the distance between base and handset. The shorter the distance
to the base, the lower the radiation.
Reducing radiation by up to 80%
Enabling/disabling the maximum range:
Disabling radiation in idle mode
The alarm is forwarded to an external destination number.
The receiving phone supports tone dialling.
The baby monitor cannot be reactivated remotely.
Reactivate: p. 29
¤
Menu Settings OK ECO DECT OK Max. Range OK ( = range and
radiation reduced)
It is not possible to use a repeater to increase the range.
The wireless signals of the base are also disabled with the No Radiation setting.
¤
Menu Settings OK ECO DECT OK No Radiation OK ( = Radiation
disabled)
All handsets registered must support this feature.
For speedy set-up of connections for incoming calls, the handset keeps switching to
“ready to receive” momentarily. This increases the power consumption and so
reduces the standby and talk times.
When No Radiation is enabled, there is no range display / range alarm on the
handset. Contactability can be tested by attempting to establish a connection.
¤
Press and hold the Talk key . . . the ringing tone sounds.