AT-510 IP phone user manual
3.2
、
Iax2 Config
9
Above is the IAX server configuration page
9
IAX Server Addr: Register address of public IAX server
9
IAX Server Port: Register port of public IAX server
，
default port is 4569
9
Account Name: Username of your SIP account (Always the same as the phone number)
9
Account Password: Password of your IAX account.
9
Local port:
Signal port of local, default port is 4569
9
9
Phone Number:
Phone number of your IAX account
9
Voice mail number: If the IAX support voice mail, but your username of the voice mail is
letters which you can not input with the ATA , then you use the number to stand for your
username
9
Voice mail text: if IAX support voice mail, config the domain name of your mail box here.
9
Echo test number: If the platform support echo test , and the number is test form , the config
the test number to replace the text format The echo test is to test the woring status of
terminals and platform
9
Echo test text: echo test number in text format
9
Refresh time: IAX refresh time
9
Enable Register: enable or disable register
9
IAX(Default Protocol): Set IAX 2 as the default protocol to initial the call ( not answering) ,
if not the system will choose SIP as default. But you can still use SIP by config the prefix in
dial plan
9
Enable G.729: Using G.729 speech coding mandatory consultations
13 / 31
