33
Connecting the telephone to the PABX
The following settings are only necessary if
your PABX requires them; see the PABX user
guide. The settings can only be made via a
registered handset (
¢
page 24).
Changing the dialling mode
The following dialling modes can be
selected:
u
Tone dialling (DTMF)
u
Pulse dialling (DP)
§§MENU§§
¢
SETTINGS
¢
DIALING MODE
q
Select the dialling mode and
press
§OK§
.
Setting recall
Recall specifies the flash time (break) used
for tone dialling when a recall (e.g. a consul-
tation call) is activated. Your phone is preset
at
the
factory
for
operation
on
the
main
connection. For operation on a PABX, you
may have to change this value. Please refer
to the user guide for your PABX.
§§MENU§§
¢
SETTINGS
¢
FLASH TIME
q
Select the recall time and press
§OK§
.
Possible values are:
100 ms, 300 ms, 600 ms.
Setting an automatic prefix
You
can set a prefix which is
automatically
added
to a
phone
number
with
at least 5
digits. This prefix can be used to dial into the
outside line when operating the device on a
PABX. A pause is added automatically after
the prefix.
The number must be dialled in idle mode, i.e.
first
~
then
d
.
Activating/deactivating the
automatic prefix
§§MENU§§
¢
SETTINGS
¢
AUTO PREFIX
¢
ACTIVATION
q
Select
ON
or
OFF
and press
§OK§
.
Setting the prefix number
§§MENU§§
¢
SETTINGS
¢
AUTO PREFIX
¢
PREFIX NO
~
Enter the prefix number and
press
§OK§
.
Example: AUTO PREFIX
=
ON
and set to 65
Temporarily switching to
tone dialling (DTMF)
If your PABX still operates with dial pulsing
(DP), but
you
need
tone
dialling
for
a
connection (e.g. to listen to a network mail
box) you must switch to tone dialling for the
call.
Requirement:
You are conducting a call or
have already dialled an external number.
During the call:
*
Press the star key.
After the call is ended, dial pulsing is
auto-matically activated again.
You dial
Actually dialled number
1234
1234
12345
65P12345
#12345
65P#12345
