Gigaset A590, User Manual

Page: 16 / 22

16
Gigaset A590 / SEA / A31008-M2045-Y701-4-7619 / main.fm / 20.10.2011
Deleting the complete phone book
(open phone book)
¢
press and hold
Ô
¢
Ì
(confirm action)
¤
To cancel the delete action press
Ó
before press-
ing
Ì
.
Using several handsets
Registering handsets
Before you can use your handset, you must register it
to the base station. You can register up to four hand-
sets. You must initiate handset registration on the
handset and on the base station.
On the base
¤
Press and hold the paging key
Ë
for at least 5
sec.
On the handset
f
(open menu)
¢
ADVANCED SET
¢
|
¢
REGISTRATION
¢
|
~
(enter current PIN, default: 0000)
¢
|
The handset is assigned the lowest unassigned inter-
nal number (1–4).
Once the handset has been registered successfully, it
returns to idle mode. The name (default: Gigaset) and
the handset’s internal number is shown in the display,
e.g.
Gigaset 1
.
If the handset was not registered successfully, the dis-
play will show
PLS REG H/S . In this case repeat the pro-
cedure.
Deregistering handsets
Precondition: the handset is in idle mode.
f
(open menu)
¢
ADVANCED SET
¢
|
¢
UNREGISTER
¢
|
~
(enter current PIN)
¢
|
¢
p
(select handset to be deregistered)
¢
|
A long confirmation tone indicates the successful
deregistration. The handset display will show

PLS REG H/S
.
Locating a handset ("paging")
You can locate the handsets using the base station.
Precondition : base station is in idle mode.
¤
Briefly press the paging key
Ë
on the base sta-
tion.
All handsets will ring using a specific paging melody.
This also applies if the ringer tones are deactivated.
The displays will show
INTERCOM X
.
In case of an incoming call, the handset quits the pag-
ing mode and then rings.
After 30 seconds handset and base station go back to
idle mode.
Ending paging manually
¤
Briefly press the paging key
Ë
on the base sta-
tion again.
Making internal calls
Internal calls are free calls to other handsets that are
registered to the same base station or to the base sta-
tion itself.
Making internal calls (handset)
Calling another internal participant
k
¢
~
(enter internal number of participant)
0 = base station, 1-4 = handset number, * = all
If only 1 handset is registered you need not enter a
number to call the handset from the base.
Accepting internal call
¤
To answer the call press
c
.
¤
To end the call, press
a
.
Incoming call during internal call
An incoming call is indicated by an acoustic signal.
c
(answer external call, end internal call) or
k
(hold internal call, accept external call)
Press and hold
k
(start conference)
Internal consultation calls
When you are speaking to an external participant,
you can call an internal participant at the same time
for consultation.
Press and hold
k
(put external call on hold)
k
¢
~
(enter internal number of participant)
You are connected with the internal participant.
k
(toggle between internal and external partici-
pant)
Please note
◆
The default system PIN may have been
changed, ( ¢
page 19).
◆
The handset name can be changed,
(
¢
page 18).
Please note
Do not deregister handsets unless necessary!