Gigaset 108 Owner'S Manual Download Page 63

Page: 63 / 143

Configuring the Advanced Settings

Gigaset WLAN Repeater 108 / englisch / A31008-M1030-B101-2-7619 / advanced_config.fm / 23.12.2005

plat

e 20

05_0

5_02

Permitted clients

Only Access Point and Repeater operating mode

In this screen you can specify which PCs will have wireless access to the Gigaset WLAN
Repeater 108 and hence to your LAN.

In the

Wireless Network

menu, select

Allowed Clients

The default setting for access control is disabled. This means that all PCs that use the
correct

SSID

can register.

The access control is based on the

MAC address

of the PCs' network adapters.

Activate access control via the

option in the

MAC address filter

field.

Entering PCs manually:

Enter the required PCs with

MAC address

and

Device name

in the appropriate

fields.

Click on the

Add

button to add the entry to the list.

Click on the

Delete

button to delete the entry from the list.

Apply the settings by clicking

Note:

The access control setting is only valid for wireless access from the PC to the repeater
or access point. If you use a router in your wireless network and have configured
access control there for PCs, this must also be set on the repeater.

Summary of Contents for 108
















































































































































Search results

Summary of Contents for 108

Reviews:

Related manuals for 108

Brands by name

Popular brands

Gigaset 108, Owner'S Manual

Search results

Summary of Contents for 108

Reviews:

Related manuals for 108

Brands by name

Popular brands