USER MANUAL
9
Chapter 4 WIRELESS NVR Starting up
4.1 Startup Wizard
Startup Wizard will help to configure the system and get the WIRELESS NVR works quickly.
4.1.1 Start Wizard
Click the
Start Wizard
to proceed to the next step
4.1.2 Network Configuration
If you connect to a router allows to use DHCP, please check the
DHCP
box. The router will assign
automatically all the network parameters for your WIRELESS NVR. Unless the network is
manually addressed below parameters:
IP Address
: The IP address identifies the WIRELESS NVR in the network. It consists of four
groups of numbers between 0 to 255, separated by periods. For example, “192.168.001.100”.
Subnet Mask
: Subnet mask is a network parameter which defines a range of IP addresses that
can be used in a network. If IP address is like a street where you live then subnet mask is like a
neighborhood. The subnet address also consists of four groups of numbers, separated by periods.
For example, “255.255.000.000”.