GIGAIPC QBiX-JMB-CMLA47EHG-B1 Page 29 Startup Manual Download

Page: 29 / 34

www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

3 Chipset

Item

Description

Primary Display

Auto : When detects PCIe Graphic card, primary display will set to PCIe (Default setting)

IGFX : Force IGFX Graphic card as the primary display device

PEG : Force PEG Graphic card as the primary display device

Internal Graphics

Enables or disables the onboard graphics function

Auto : Detects display device automatically (Default setting)

Enabled : Enables onboard graphics

Disabled : Disables onboard graphics

VT-d

Enabled : Enables VT-d function (Default setting)

Disabled : Disables VT-d function

DVMT Pre-Allocated

Use DVMT Pre-Allocated to set the amount of system memory which is installed to the integrated graphics processor

Option items : 32M , 64M(Default setting), 128M, 256M

Above 4GB MMIO BIOS

assignment

Enable or disable to re-allocate memory space for device cards when more than one external graphic cards installed.

(This function could be only used under 64 bit operating system with above 4 GB address space)

Enabled : Enables Above 4GB MMIO BIOS assignment function

Disabled : Disables Above 4GB MMIO BIOS assignment function (Default setting)

HD Audio

Enable/Disable onboard audio controller

Enabled : Enables onboard audio controller (Default setting)

Disabled : Disables onboard audio controller

Onboard LAN1

Onboard LAN2

Onboard LANA & LANB

Enable/Disable onboard LAN controller

Enabled : Enables onboard LAN controller (Default setting)

Disabled : Disables onboard LAN controller

Restore AC Power Loss

To set which option the system should returns if a sudden power loss occured

Power off : Do not power on when the power is back (Default setting)

Power on : System power on when the power is back

Last state : Restore the system to the state before power loss occures

Watchdog Timer

Enable/Disable Watchdog Timer function

Disabled : Disabled Watchdog Timer function (Default setting)

30s : delay watchdog for 30 seconds.

60s : delay watchdog for 60 seconds.

XHCI Hand-off

Enable/Disable XHCI Hand-off function

Enabled : Enables XHCI Hand-off function (Default setting)

Disabled : Disables XHCI Hand-off function

BIOS Lock

Enable/Disable BIOS Lock function

Enabled : Enables BIOS Lock function (Default setting)

Disabled : Disabled BIOS Lock funtion

Summary of Contents for QBiX-JMB-CMLA47EHG-B1



































Search results

Summary of Contents for QBiX-JMB-CMLA47EHG-B1

Reviews:

Related manuals for QBiX-JMB-CMLA47EHG-B1

Brands by name

Popular brands

GIGAIPC QBiX-JMB-CMLA47EHG-B1, Startup Manual

Search results

Summary of Contents for QBiX-JMB-CMLA47EHG-B1

Reviews:

Related manuals for QBiX-JMB-CMLA47EHG-B1

Brands by name

Popular brands