manualshive.com logo in svg

Gigahertz Solutions ME 3951A, User Manual

Share
Download
Gigahertz Solutions ME 3951A User Manual Download Page 2

With the field meters of the ME 3 series, GIGAHERTZ SOLUTIONS® sets new standards in elec-
tromagnetic field testing. Professional measurement engineering is offered with a unique
price/performance ratio - the only one of its kind worldwide. This was made possible through the
consistent use of innovative integrated components, some of which have patents pending, as well
as highly sophisticated production engineering.

The field meter you purchased allows a competent assessment of AC electric as well as AC
magnetic field exposures according to the internationally recognized Swedish guidelines for com-
puter monitors (TCO/MPR), covering the entire frequency range from 5 Hz up to 400 kHz.

We appreciate the confidence you showed when purchasing the ME 3951A field meter. With the
confidence that your expectations will be met, we wish you great success in collecting useful
information with this field meter.

© by the manufacturer: GIGAHERTZ SOLUTIONS® GmbH, D-90579 Langenzenn. All rights reserved. No part of this
document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including pho-
tocopying, or recorded by any information storage or retrieval system, without permission in writing by GIGAHERTZ

SOLUTIONS® GmbH.

2

© by 

GIGAHERTZ SOLUTIONS

®

GmbH, 90579 Langenzenn, www.gigahertz-solutions.com

Preface

GIGAHERTZ

SOLUTIONS

R

Summary of Contents for ME 3951A
























Reviews:

No comments

Brands by name

Popular brands

Load more brands