manualshive.com logo in svg

Gigahertz Solutions ME 3951A, User Manual

Share
Download
Gigahertz Solutions ME 3951A User Manual Download Page 19

2. When two dots appear in the center of the display (low batt.), the field meter will be turned off

after 3 min in order to protect the rechargeable battery from becoming completely discharged,
which would cause damage.

In order to turn on the field meter after an Auto-Power-Off, simply turn it off and on again.

Caution

: If the DC signal output is connected, the normal Auto-Power-Off function is disabled.

This way it becomes possible to perform data logging supported by the rechargeable
battery, up to 8 hours. The low-battery shut-off, however, will kick in after 3 min just the
same in order to protect the rechargeable battery from the damages of a complete
(deep) discharge.

With an alkaline battery, it is possible to perform 24-hour data logging.

Caution:

If an alkaline battery is being used, under no circumstances ever should the power
adapter be connected at the same time. Otherwise the battery may explode.

Checking Battery Status 

and Display-Check

Since the integrated rechargeable battery is not always charged
completely, it is possible to find out the remaining operating time
as well as the proper functioning of all display segments by pres-
sing the "Batt.-Check" button.

1. In order to check the battery status, simply turn on the field meter,

press the button and continue to keep it pressed. If the display
shows "1999" or "1888," the instrument is optimally supplied with
power and all display elements function accurately. Picture 30.

Picture 30

2. When the instrument is turned on and the low battery button is

pressed, “low batt.” in the center of the display indicate that under
normal conditions the operating time will be less than 1 hour. 
Picture 31

If need should be, recharge battery or turn off field meter.

Picture 31

Contact:

Gigahertz Solutions GmbH

For your local distributor please contact

Am Galgenberg 12

www.gigahertz-solutions.com

D - 90579 Langenzenn
Germany
Phone +49 (9101) 9093-0
Fax +49 (9101) 9093-23
www.gigahertz-solutions.com

Press the button!

Press the button!

19

© by 

GIGAHERTZ SOLUTIONS

®

GmbH, 90579 Langenzenn, www.gigahertz-solutions.com

Battery Management

GIGAHERTZ

SOLUTIONS

R

Summary of Contents for ME 3951A
























Reviews:

No comments

Brands by name

Popular brands

Load more brands