Made in Germany
© Gigahertz Solutions GmbH
19
1)
Volume control for the audio analysis (on/off switch
. ).
2)
Jack, 3.5 mm: AC output for the modulated part of the signal,
for audio analysis via PC or headset.
3)
Calibrated AC output 1 Volt peak-peak, proportional to the field
strength.
4)
Jack, 12-15 Volt DC for charging the battery. AC adapter for 230
Volt/50 Hz and 60 Hz is included. For other Voltag-
es/Frequencies please get an equivalent local AC adaptor with
the output parameters 12 – 15 Volt DC / >100mA.
Caution:
If an alkaline battery is used, under no circumstances
should the power adapter be connected at the same time, oth-
erwise the battery may explode.
5)
Measurement ranges
max = 19.99 mW/m²
(= 19,990 μW/m²)
min = 1999 μW/m²
Scaling differs when applying the optionally available amplifier or damper!
6)
Selector switch for signal evaluation. In the peak hold mode you
can choose a time setting for the droop rate (Standard = “+”).
The peak hold value can be manually reset by pressing (13)
“clear”.
7)
A little bar on the very left of the LCD indicates the unit of the
numerical reading:
bar on top =
m
W/m² (Milliwatts/m²)
bar on bottom =
μ
W/m² (Microwatts/m²)
8)
DC output, allows you to connect additional instruments, e.g.
data logging devices for longterm recordings. Scalable to 1 V
DC full scale
.
9)
Connecting socket for antenna cable. The antenna is inserted
into the cross slot at the front tip of the instrument.
10)
Power Level Adapter Switch for external optional amplifier or
attenuator only
(not part of the standard scope of supply)
. For regular
use of the instrument the switch should be in pos. “0 dB”.
(Any
other position will shift the decimal point to an incorrect position).
11)
ON/OFF switch. Using the top switch-position activates the au-
dio analysis mode.
12)
Load indicator
13)
Push button to reset peak hold.
(Push and hold for 2 seconds or until
the readings no longer drop)
14)
Switch for selecting the Video Bandwidth.
Switches for rarely used functions are recessed in the casing of the
instrument.
Contents of the package
Meter, attachable antenna incl. cable, rechargeable battery pack (in
the meter), mains adapter, manual.
