GigaFast Ethernet
Section 4
System Setting:
Administrator:
[Reset to Default]:
Reset system settings to factory default, and
restart automatically after completion.
[Backup Setting]:
Save the current system settings into a file in order
to restore the Wireless Access Point Router
settings if needed in the future.
[Restore Setting]:
Restore the previous system settings from a
saved backup file. When completed, the Wireless
Access Point Router restarts automatically.
The Wireless Access Point Router allows system settings Backup/Restore
only when both firmware versions are the same. Otherwise the Wireless
Access Point Router will deny the restore operation for reliability
considerations.
[Reset to Default]:
Type in your old password and new password and
confirm it. Then press OK to send the request.
[Auto Logout]:
Whenever the administrator is idle for more than
the specified time (default is 300 seconds), the
Wireless Router will logout automatically for
security.
Click [browse] to choose the correct firmware upgrade file (*.upg).
When a file has been selected, click [Go] to send the request. The
Wireless Router’s firmware will be upgraded immediately.
Upgrade Firmware:
After a about 20-30 second, the Wireless Router will restart automatically.
