GigaFast Ethernet
Section 3
User could configure the AP by modifying the contents of each parameter in
the above dialogue box. Below is a brief explanation of the Access Point
parameters:
The Access Point can be assigned a name for easy
reference here.
All wireless devices within the ESS or extended wireless LAN use the
SSID. This can be any alphanumeric value of up to 32 long. Use this to
prevent cross communication between two or more WLAN in one area.
There are 11-14 channels available for with the Access Point. All
devices communicating with the device must use the same channel. There
may be restrictions on which channel can be used in some countries. In
Canada and the US, the IC and FCC authorize channels 1-11 for use.
Access Point Name:
SSID:
Channel:
Note:
If there is more than one AP installed in the same place, please
separate APs by at least 4 channels, for example Channel 1 to AP1,
Channel 6 to AP2, Channel 11 to AP3...
