Chapter 2
Quick Install:
Install
a
10/100Mbps (10/10
1.
0Base-TX) network adapter card into
e you
2.
cables with RJ-45 plugs (Ethernet
ons.
nd the other end to any available port of the
5. Insert the power pack into the power outlet.
ur home/business network with the EZ-
00s into a router, simply have an Ethernet cable connected in between of
e EZ-800s and the router you have. Any port will work because of the
uto-uplink function on the switch.
every computer you want to attach to the network. Make sur
install the Network adaptor drivers in accordance with the
manufacturers’ directions.
Prepare the twisted-pair
adapters) on each end. Use Category 5/5e cable for all connecti
Make sure the cable length is less than or equal to no more than
100
meters (
328 feet
).
3. Attach one end of the cable to the RJ-45 port of the computer’s
network adapter card a
8-port Network Switch.
4. Locate a suitably switched
120volt
AC power outlet to plug in the
supplied power pack.
6. Connect the cable attached to the power pack adapter to the power
inlet on the rear panel of the switch.
*
Note
* If you’re trying to expand yo
8
th
a
Summary of Contents for EZ800-S
Page 1: ...EZ 800S Mini 8 Port Switch User Manual ...
Page 7: ...Wire Diagram ...
