Q: I have plugged in everything that is required on the EZ-800s and
?
A: Try to d
To do a power-cycle:
re operating
ink light flashes once every second or so.
A: There are several situations might o
port is flashing.
network
: I have set up my switch with static IP’s and all the lights seem to
(For most
1. Go to: Start > Settings > Control Panel and click on ‘System’
have checked the settings, but still can’t get a connection through the
switch, what do I do
o a power-cycle on the EZ-800s and see if that makes any difference.
1. Unplug the power off the switch and leave it for few minutes
2. Plug back in the power after and wait for a few seconds befo
Q: I plugged in my Ethernet cable into one of the ports on the EZ-
800s and the L
ccur when the Link light on that particular
1. Your Ethernet cable might be defective
2. The TX/Duplex rate on the network cards are different from each other
3. Static IP addresses weren’t set on the computers that is within the
Q
be okay, but I can’t do file sharing with my computers that are
plugged into the EZ-800s
A: Make sure you have same ‘Work Group’ names on each computer. To
change your ‘Work Group’ name:
Windows based Operating System
)
Summary of Contents for EZ800-S
Page 1: ...EZ 800S Mini 8 Port Switch User Manual ...
Page 7: ...Wire Diagram ...
