Make sure the cable length is less than or equal to no more than
100
meters (
328 feet
).
Attach one end of the ca
3.
ble to the RJ-45 port of the computer’s
.
r outlet to plug in the
5.
outlet.
6. Connect the cable attached to the power pack adapter to the power
-
thernet cable connected in between of
e EZ-500s and the router you have. Any port will work because of the
uto-uplink function on the switch.
network adapter card and the other end to any available port of the
5-port Network Switch
4. Locate a suitably switched
120volt
AC powe
supplied power pack.
Insert the power pack into the power
inlet on the rear panel of the switch.
*
Note
* If you’re trying to expand your home/business network with the EZ
500s into a router, simply have an E
th
a
Aftermath:
After you have successfully installed the EZ-500s, check the lights in the f
and see if they are operating. For each Ethernet cable you insert into the port on
the switch and the othe
ront
r end, the link light in the front will light up. If you
xperience problems with this product please read our
FAQ
guide or contact our
-Mail:
e
technical support line.
E
Website:
www.gigafast.com
Thank you for choosing GigaFast
8
