3. Static IP addresses weren’t set on the computers that is within the networ
Q: I have set up my switch
k
with static IP’s and all the lights seem to
e okay, but I can’t do file sharing with my computers that are
: Make sure you have same ‘Work Group’ names on each computer. To
(Fo
1.
will
allow you to change the workgroup name on that particular computer
so, which port?
ere is no need for
user to configure an EZ-500s to have a LAN/WAN based connection. All the
: I have a router and the EZ-500s can I expand my network with
b
plugged into the EZ-500s
A
change your ‘Work Group’ name:
r most
Windows based Operating System
)
Go to: Start > Settings > Control Panel and click on ‘System’
2. You should then see several tabs on one dialog. One of those tabs
3. Be certain that all the computers have the same workgroup name
Q: Does the EZ-500s have the ‘auto uplink’ ability? If
A: Our EZ-500s all have auto uplink and any port supports it.
Q: Does the EZ-500s have a user interface like a router?
A: No, the EZ-500s does not have a user interface because th
a
changes should be applied under the Operating System itself.
Q
those two devices?
11
