Gigafast EE410-R, User Manual

Page: 34 / 43

2-2-2 Static IP
If the Service Provider has assigned a fixed IP address, enter
the assigned IP address subnet mask and gateway address
provided. Click “yes” if using two or more IP addresses.
2-2-3 Dial-up xDSL (PPPoE)
If connected to the Internet using a Dial-up xDSL (PPPoE)
Modem, the ISP will provide a Password and User Name, and
then the ISP uses PPPoE. Choose this option and enter the
required information, if the ISP provided a Service Name, enter
it in the column of the Service Name field, otherwise, leave it
blank.
The MTU feature specifies the largest packet size permitted for
network transmission. Enter the value desired, for most DSL
users, it is recommended to use 1492. By default, MTU is set at
1492.
The Maximum Idle Time feature can control the connection time
while user’s need to save the cost of connection fee from ISP
provider (default time=0, always connect). Click on the
Connect-on-demand button to dial up to the ISP when only on
demand, while there is a need of connecting to the ISP
automatically.
28