Gigafast EE410-R, User Manual

Page: 14 / 43

blinks green while transmitting or receiving data on the
100Mbps Fast Ethernet or 10Mbps Ethernet network.
Rear Panel
The figure below shows the rear panel of the Broadband Router.
1 2 3 4
RESET
WAN
- +
II X
4 Port 10/100Mbps Ethernet Broadband Router Rear Panel
WAN
In the four port broadband router, there are two RJ-45 ports for
the WAN, the port can be either connected to “II” which is for
hub/switch or “X” port for crossover, and this will fit the
xDSL/Cable modem’s specification need.
NOTE: Only one port can be plug-in to the WAN port, either the “II” port or “X” port.
LAN (1-4)
These ports are the four RJ-45 10/100Mbps auto-sensing ports
for connecting to either 10Mbps or 100Mbps Ethernet
connections.
RESET
Use a pin-shape item to push to reset this device to factory
default settings. It will be useful too when the manager forgot
the password to login, but the setting will be back to default
setting.
8