CardBus Ethernet card user manual
8
Figure 2-6: RJ-45 connector LEDs
The following table describes the meaning of the LEDs:
LED
MEANING
ACT
Indicates transmit or receive activity. It is normally off. When there is
packet transmit or receive activity, this LED is on.
100M
Indicates the connection speed. When off, the connection speed is
10 Mbps. When on, the connection speed is 100 Mbps.
LNK
Indicates whether the link is active or not. When lit, indicates that the
link is active. When off, indicates that the link is inactive.
Disconnecting the Ethernet Card
The Ethernet Card RJ-45 connector is designed to lock in place when connected
to the Ethernet Card. The following illustration shows the location of the clips:
Figure 2-7: Disconnecting the RJ-45 cable
