8. Select the
Line Speed value
(AUTO, 100full, 100half, 10full, 10half)
9. To complete network installation, remember to bind the adapter to the transport drivers by
choosing the
"Bindings"
button from the "Network" dialog box.
our floppy drive.
12.
Restart
your computer to initialize the network function.
Then click the
OK
button in the "Select Line Speed" dialog box.
10. Click the
"Close"
button in the "Network" dialog box.
11.
Remove the Driver Diskette
from y
Install on Linux
1. Compile the source code:
->Copy the source code rtl8139.c (ver 1.08 above) to a directory and execute "gcc -
CARDBUS -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c rtl8139.c -o
-I/usr/src/linux/pcmcia-cs-3.0.9/include/"
he directory "pcmcia-cs-3.0.9" stands for the card service version you use. Please change it to
#
#
(==>Add 1/5)
Class "network" module "cb_enabler", "realtek_cb" (==>Add 2/5)
:
:
#
# CardBus Cards
#
card "Realtek CardBus Ethernet Card"
(==>Add 3/5)
manfid 0x0000, 0x024C
(==>Add 4/5)
bind "realtek_cb"
(==>Add 5/5)
D
realtek_cb.o
T
the version on your system in order to include proper .h file. The final file is realtek_cb.o
2. Copy driver :
->Copy the file "realtek_cb.o" to "/lib/modules/2.2.14-5.0/pcmcia"
3. Edit config:
->Add 5 lines to the file "/etc/pcmcia/config"
# Device driver definitions
Device "realtek_cb"
21
Summary of Contents for EE100-AXP
Page 1: ...EE 100AXP User Manual 32 bit PCI BUS 10 100 Mbps Fast Ethernet Adapter 1 ...
Page 11: ...er Recommended and click Next button 5 Choose the updated driv 11 ...
Page 17: ...Click Yes 6 button to restart your computer to take effect 17 ...
Page 19: ...2 Highlight the Internet Protocol TCP IP and then click the Properties button 19 ...
