Gigabyte Z390 UD User Manual Download Page 6

Page: 6 / 48

1-2 Product Speciications

CPU

Support for Intel 9000 processors and 8th Generation Intel

Core

™

i7 processors/

Intel

Core

™

i5 processors/Intel

Core

™

i3 processors/Intel

Pentium

processors/

Intel

Celeron

processors in the LGA1151 package

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset

Intel

Z390 Express Chipset

Memory

4 x DDR4 DIMM sockets supporting up to 64 GB of system memory

Dual channel memory architecture

Support for DDR4 2666/2400/2133 MHz memory modules

Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in

non-ECC mode)

Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

Support for Extreme Memory Proile (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory
modules.)

Onboard
Graphics

Integrated Graphics Processor-Intel

HD Graphics support:

- 1 x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz

* Support for HDMI 1.4 version and HDCP 2.2.

Maximum shared memory of 1 GB

Audio

Realtek

ALC887 codec

High Deinition Audio

2/4/5.1/7.1-channel

* To conigure 7.1-channel audio, you have to use an HD front panel audio module

and enable the multi-channel audio feature through the audio driver.

Support for S/PDIF Out

LAN

Realtek

GbE LAN chip (10/100/1000 Mbit)

Expansion Slots

1 x PCI Express x16 slot, running at x16 (PCIEX16)

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

2 x PCI Express x16 slots, running at x4 (PCIEX4_1/PCIEX4_2)

3 x PCI Express x1 slots
(All of the PCI Express slots conform to PCI Express 3.0 standard.)

Multi-Graphics
Technology

Support for AMD Quad-GPU CrossFire

™

and 2-Way AMD CrossFire

™

technologies

Storage
Interface

Chipset:
-

1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and
PCIe x4/x2 SSD support, prepared for Intel

Hybrid SSD)

6 x SATA 6Gb/s connectors

- Support for RAID 0, RAID 1, RAID 5, and RAID 10

* Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA

connectors.

Intel

Optane

™

Memory Ready

- 6 -

Summary of Contents for Z390 UD

















































Search results

Summary of Contents for Z390 UD

Reviews:

Brands by name

Popular brands

Gigabyte Z390 UD, User Manual

Search results

Summary of Contents for Z390 UD

Reviews:

Brands by name

Popular brands