2-5 Peripherals
&
Initial Display Output
Speciies the irst initiation of the monitor display from the installed PCI Express graphics card or the onboard
graphics.
IGFX
Sets the onboard graphics as the irst display.
PCIe 1 Slot
Sets the graphics card on the PCIEX16 slot as the irst display. (Default)
PCIe 2 Slot
Sets the graphics card on the PCIEX8 slot as the irst display.
PCIe 3 Slot
Sets the graphics card on the PCIEX4 slot as the irst display.
&
EZ RAID
Allows you to quickly set up a RAID array. Refer to Chapter 3, "Coniguring a RAID Set," for instructions
on coniguring a RAID array.
&
Above 4G Decoding
Enables or disables 64-bit capable devices to be decoded in above 4 GB address space (only if your system
supports 64-bit PCI decoding). Set to Enabled if more than one advanced graphics card are installed and
their drivers are not able to be launched when entering the operating system (because of the limited 4 GB
memory address space). (Default: Disabled)
&
RGB Fusion
Allows you to set the LED lighting mode for the motherboard.
Off
Disables this function.
Pulse Mode
All LEDs simultaneously fade in and fade out.
Color Cycle
All LEDs simultaneously cycle through a full spectrum of colors.
Static Mode
All LEDs emit a single color. (Default)
Flash Mode
All LEDs simultaneously lash on and off.
Double Flash All LEDs lash in an interlaced pattern.
&
LEDs in Sleep, Hibernation, and Soft Off States
Allows you to set the lighting mode of the motherboard LEDs in system S3/S4/S5 state.
This feature is supported only with a 5V digital LED strip.
Off
Disables the selected lighting mode when the system enters S3/S4/S5 state. (Default)
On
Enables the selected lighting mode when the system enters S3/S4/S5 state.
- 34 -
