manualshive.com logo in svg

Gigabyte Z370 AORUS Gaming 7, User Manual, Page: 12 / 48

Share
Download
Gigabyte Z370 AORUS Gaming 7 User Manual Download Page 12

1-7 

Back Panel Connectors

PS/2 Keyboard/Mouse Port

Use this port to connect a PS/2 mouse or keyboard.

USB 3.1 Gen 1 Port

The USB 3.1 Gen 1 port supports the USB 3.1 Gen 1 speciication and is compatible to the USB 2.0 

speciication. You can connect a USB DAC to this port or use this port for USB devices.

DVI-D Port 

(Note)

The DVI-D port conforms to the DVI-D speciication and supports a maximum resolution of 1920x1200@60 Hz 

(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports 
DVI-D connection to this port.

USB 3.1 Gen 2 Type-A Port (Red)

The USB 3.1 Gen 2 Type-A port supports the USB 3.1 Gen 2 speciication and is compatible to the USB 

3.1 Gen 1 and USB 2.0 speciication. Use this port for USB devices.

USB Type-C

™

 Port

The reversible USB port supports the USB 3.1 Gen 2 speciication and is compatible to the USB 3.1 Gen 

1 and USB 2.0 speciication. Use this port for USB devices.

USB 3.1 Gen 1 Port

The USB 3.1 Gen 1 port supports the USB 3.1 Gen 1 speciication and is compatible to the USB 2.0 

speciication. Use this port for USB devices.

HDMI Port

The HDMI port supports HDCP 2.2 and Dolby TrueHD and DTS HD Master 
Audio formats. It also supports up to 192KHz/16bit 8-channel LPCM audio 

output. You can use this port to connect your HDMI-supported monitor. The maximum supported 
resolution is 4096x2160@30 Hz, but the actual resolutions supported are dependent on the monitor 
being used.

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following 
describes the states of the LAN port LEDs.

After installing the HDMI device, make sure to set the default sound playback device to HDMI. 
(The item name may differ depending on your operating system.)

(Note) 

The DVI-D port does not support D-Sub connection by adapter.

Activity LED

Connection/

Speed LED

LAN Port

Activity LED:

Connection/Speed LED:

State 

Description

Orange

1 Gbps data rate

Green

100 Mbps data rate

Off

10 Mbps data rate

State 

Description

Blinking

Data transmission or receiving is occurring

On

No data transmission or receiving is occurring

- 12 -

Summary of Contents for Z370 AORUS Gaming 7

















































Reviews:

No comments