Appendix
- 32 -
To select 2 x8 mode:
To select 1 x16 mode:
### Commit the change to Fuji’s persistent memory
To select the different Ethernet speeds
50G FC FEC
100G RS FEC
Here is a high-level description of these parameters:
set-autoneg <Port> <TX> <RX> <FEC> <TECH>
<Port> Set to 1 for Ethernet Port #1 and 2 for Ethernet Port #2
<TX> Set to 1 (enables TX Pause Flow Control)
<RX> Set to 1 (enables RX Pause Flow Control)
<FEC> Set to 1 for FC FEC and 2 for RS FEC (100G speed requires RS FRC to be enabled)
<TECH> Selects Ethernet speed (set to 4 for 50G, 8 for 100G. When configured for 100G,
TECH parameter for Ethernet Port #2 must be set to 0 to disable the Port since Fuji supports a
single
100G
port)
