manualshive.com logo in svg

Gigabyte R283-Z93-AAF1, User Manual

Share
Download
Gigabyte R283-Z93-AAF1 User Manual Download Page 63

BIOS Setup

- 63 -

5-1  The Main Menu

Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use 
arrow keys to move among the items and press <Enter> to accept or enter other sub-menu.

Main Menu Help

The on-screen description of a highlighted setup option is displayed on the bottom line of the Main Menu.

Submenu Help

While in a submenu, press <F1> to display a help screen (General Help) of function keys available for the 
menu. Press <Esc> to exit the help screen. Help for each item is in the Item Help block on the right side of 
the submenu.

•  When the system is not stable as usual, select the 

Restore Defaults

 item to set your system to 

its defaults. 

•  The BIOS Setup menus described in this chapter are for reference only and may differ by BIOS 

version.

Summary of Contents for R283-Z93-AAF1














































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands