Gigabyte R283-S95-AAC1 User Manual Download Page 96

Page: 96 / 119

- 96 -

BIOS Setup

Parameter

Description

SATA And RST

Configuration/

SATA Controller And RST

Configuration (continued)

Port 0/1/2/3/4/5/6/7

– Enable/Disable Port 0/1/2/3/4/5/6/7 device.

– Options available: Enabled, Disabled. Default setting is

Enabled

Hot Plug (for Port 0/1/2/3/4/5/6/7)

– Enable/Disable HDD Hot-Plug function.

– Options available: Enabled, Disabled. Default setting is

Enabled

Spin Up Device (for Port 0/1/2/3/4/5/6/7)

– On an edge detect from 0 to 1, the PCH starts a COM reset

initialization to the device.

– Options available: Enabled, Disabled. Default setting is

Disabled

SATA And RST

Configuration/

sSATA Controller And RST

Configuration

SATA Configuration

– Enable/Disable SATA controller.

– Options available: Enabled, Disabled. Default setting is

Enabled

SATA Mode Selection

–

Configures on chip SATA type.

– AHCI Mode: When set to AHCI, the SATA controller enables its AHCI

functionality. Then the RAID function is disabled and cannot be access
the RAID setup utility at boot time.

– RAID Mode: When set to RAID, the SATA controller enables both its

RAID and AHCI functions. You will be allowed to access the RAID
setup utility at boot time.

– Options available: AHCI, RAID. Default setting is

AHCI

RAID Device ID

(Note)

– Choose RAID Device ID.

– Options available: Client, Alternate, Server. Default setting is

Server

SATA Port 4/5/6/7

–

The category identifies sSATA hard drives that are installed in the

computer. System will automatically detect HDD type.

SATA Port 4/5/6/7

– Enable/Disable Port 4/5/6/7 device.

– Options available: Enabled, Disabled. Default setting is

Enabled

Hot Plug (for Port 4/5/6/7)

– Enable/Disable HDD Hot-Plug function.

– Options available: Enabled, Disabled. Default setting is

Enabled

Spin Up Device (for Port 4/5/6/7)

– On an edge detect from 0 to 1, the PCH starts a COM reset

initialization to the device.

– Options available: Enabled, Disabled. Default setting is

Disabled

(Note) Only appears when HDD sets to

RAID

Mode.

Summary of Contents for R283-S95-AAC1
























































































































Search results

Summary of Contents for R283-S95-AAC1

Reviews:

Related manuals for R283-S95-AAC1

Brands by name

Popular brands

Gigabyte R283-S95-AAC1, User Manual

Search results

Summary of Contents for R283-S95-AAC1

Reviews:

Related manuals for R283-S95-AAC1

Brands by name

Popular brands