Gigabyte R283-S90-AAE1, User Manual

Page: 13 / 131

- 13 -
Hardware Installation
Storage
(AAE1)
(AAJ1)
Š
4 x 3.5/2.5" Gen4 NVMe/SATA/SAS hot-swappable bays
Š
8 x 3.5/2.5" SATA/SAS hot-swappable bays
Š
2 x 2.5" SATA/SAS hot-swappable bays on rear side
SAS card is required for SAS devices support
(AAE2)
(AAJ2)
Š
12 x 3.5/2.5" SATA/SAS hot-swappable bays
Š
2 x 2.5" SATA/SAS hot-swappable bays on rear side
SAS card is required for SAS devices support
(AAE3)
(AAJ3)
Š
12 x 3.5/2.5" Gen4 NVMe/SATA/SAS hot-swappable bays
Š
2 x 2.5" SATA/SAS hot-swappable bays on rear side
SAS card is required for SAS devices support
SAS
Š
Depends on SAS Add-on card
RAID
Š
Intel® SATA RAID 0/1/10/5
Expansion Slot
(AAE1)
(AAJ1)
Riser Card CRS101J
Š
1 x PCIe x16 slot (Gen5 x16), FHHL from CPU_0
Riser Card CRS101K:
Š
1 x PCIe x16 slot (Gen5 x16), FHHL from CPU_1
Riser Card CRS202E:
Š
2 x Low profile half length slots with PCIe x16 (Gen5 x8 bus), from
CPU_0
Riser Card CRS202G:
Š
2 x PCIe x16 slots (Gen5 x16), FHHL from CPU_0*
NOTE: Slot_10 would be downgraded to Gen4 if using XCC CPU with
4 x UPI
Riser Card CRS202H:
Š
2 x PCIe x16 slots (Gen5 x16), FHHL from CPU_1
2 x OCP 3.0 slots with PCIe Gen5 x16 bandwidth
(1 x from CPU_0 and 1 x from CPU_1)
Supported NCSI function