manualshive.com logo in svg

Gigabyte R283-S90-AAE1, User Manual

Share
Download
Gigabyte R283-S90-AAE1 User Manual Download Page 129

- 129 -

BIOS Setup

Parameter

Description

Restore Defaults

Loads the default settings for all BIOS setup parameters. Setup Defaults 
are quite demanding in terms of resources consumption. If you are using 
low-speed memory chips or other kinds of low-performance components 
and you choose to load these settings, the system might not function 
properly.
Options available: Yes, No.

Save the User Default Values Saves the changes made as the user default settings.

Options available: Yes, No.

Restore the User Default 
Values

Loads the user default settings for all BIOS setup parameters.
Options available: Yes, No.

Boot Device Priority

Press [Enter] to configure the device as the boot-up drive.

Launch EFI Shell

Attempts to Launch EFI Shell application (Shell.efi) from one of the
available file system devices.

Summary of Contents for R283-S90-AAE1




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands