Gigabyte R281-3C0 Page 100 Service Manual Download

Page: 100 / 117

BIOS Setup

- 100 -

5-4-3 BMC Network Configuration

Select NCSI and Dedicated LAN

Switch NCSI and dedicated LAN and send KCS command.

Options available: Do Nothing/Mode1 (Dedicated)/Mode2(NSCI)/Mode3 (Failover).

Default setting is

Mode1 (Dedicated)

Lan Channel 1

Configuration Address source

Select to configure LAN channel parameters statically or dynamically (DHCP). Do nothing option will not

modify any BMC network parameters during BIOS phase.

Options available: Unspecified/Static/DynamicBmcDhcp. Default setting is

DynamicBmcDhcp

Station IP address

Displays IP Address information.

Subnet mask

Displays Subnet Mask information.

Please note that the IP address must be in three digitals, for example, 192.168.000.001.

Router IP address

Displays the Router IP Address information.

Station MAC address

Displays the MAC Address information.

Real-time synchronize BMC network parameter values

Press [Enter] to synchronize the BMC network parameter values.

Summary of Contents for R281-3C0






















































































































Search results

Summary of Contents for R281-3C0

Reviews:

Related manuals for R281-3C0

Brands by name

Popular brands

Gigabyte R281-3C0, Service Manual

Search results

Summary of Contents for R281-3C0

Reviews:

Related manuals for R281-3C0

Brands by name

Popular brands