manualshive.com logo in svg

Gigabyte R281-3C0, Service Manual, Page: 58 / 117

Share
Download
Gigabyte R281-3C0 Service Manual Download Page 58

BIOS Setup

- 58 -

  GateA20 Active

 

When set to Upon Request, GA20 can be disabled using BIOS services. When set to Always, GA20 
cannot be disabled; this option is useful when any RT code is executed above 1MB. 

 

Options available: Upon Request/Always. Default setting is 

Upon Request

.

 

Please note that this item is configurable when CSM Support is set to Enabled.

  INT19 Trap Response

 

Configures BIOS reaction on INT19 trapping by Option ROM. When set to Immediate, the system 
executes the trap right away. When set to Postponed, the system executes the trap during legacy boot. 

 

Options available: Immediate/Postponed. Default setting is 

Immediate

.

 

Please note that this item is configurable when CSM Support is set to Enabled.

  INT19 Endless Retry

 

Enable/Disable headless retry boot. 

 

Options available: Enabled/Disabled. Default setting is 

Enabled

.

 

Please note that this item is configurable when CSM Support is set to Enabled.

  Option ROM execution
 Network

 

Controls the execution of UEFI and Legacy PXE Option ROM. 

 

Options available: Do not launch/UEFI/Legacy. Default setting is 

UEFI

.

 

Please note that this item is configurable when CSM Support is set to Enabled.

 Storage

 

Controls the execution of UEFI and Legacy Storage Option ROM. 

 

Options available: Do not launch/UEFI/Legacy. Default setting is 

UEFI

.

 

Please note that this item is configurable when CSM Support is set to Enabled.

 Video

 

Controls the execution of UEFI and Legacy Video Option ROM. 

 

Options available: Do not launch/UEFI/Legacy. Default setting is 

UEFI

.

 

Please note that this item is configurable when CSM Support is set to Enabled.

  Other PCI devices

 

Determines Option ROM execution policy for devices other than Network, Storage, or Video. 

 

Options available: Do not launch/UEFI/Legacy. Default setting is 

UEFI

.

 

Please note that this item is configurable when CSM Support is set to Enabled.

Summary of Contents for R281-3C0






















































































































Reviews:

No comments