Gigabyte R263-Z30 Page 156 User Manual Download

Page: 156 / 165

BIOS Setup

- 156 -

5-6-3

BMC Network Configuration

Parameter

Description

BMC network configuration

Lan Channel 1

Configuration Address source

Selects to configure LAN channel parameters statically or dynamically

(DHCP). Do nothing option will not modify any BMC network parameters
during BIOS phase.

Options available: Unspecified, Static, DynamicBmcDhcp. Default setting

DynamicBmcDhcp

Station IP address

Displays IP Address information.

Subnet mask

Displays Subnet Mask information.
Please note that the IP address must be in three digitals, for example,
192.168.000.001.

Router IP address

Displays the Router IP Address information.

Station MAC address

Displays the MAC Address information.

VLAN Support

Set BMC to enable/disable VLAN support.
Options available: Enabled, Disabled. Default setting is

Disabled

Real-time synchronize BMC
network parameter values

Press [Enter] will set Address source(Static/DHCP) to BMC and then get
Station IP address, Subnet mask and Router IP address from BMC.

Summary of Contents for R263-Z30






































































































































































Search results

Summary of Contents for R263-Z30

Reviews:

Related manuals for R263-Z30

Brands by name

Popular brands

Gigabyte R263-Z30, User Manual

Search results

Summary of Contents for R263-Z30

Reviews:

Related manuals for R263-Z30

Brands by name

Popular brands