Gigabyte R261-3C0 User Manual Download Page 91

Page: 91 / 107

- 91 -

BIOS Setup

There are two types of passwords that you can set:

• Administrator Password

Entering this password will allow the user to access and change all settings in the Setup Utility.

• User Password

Entering this password will restrict a user’s access to the Setup menus. To enable or disable

this field, a Administrator Password must first be set. A user can only access and modify the

System Time, System Date, and Set User Password fields.

5-5 Security Menu

The Security menu allows you to safeguard and protect the system from unauthorized use by setting up
access passwords.

Parameter

Description

Administrator Password

Press [Enter] to configure the administrator password.

User Password

Press [Enter] to configure the user password.

Secure Boot

Press [Enter] to configure advanced items.

Summary of Contents for R261-3C0












































































































Search results

Summary of Contents for R261-3C0

Reviews:

Related manuals for R261-3C0

Brands by name

Popular brands

Gigabyte R261-3C0, User Manual

Search results

Summary of Contents for R261-3C0

Reviews:

Related manuals for R261-3C0

Brands by name

Popular brands