Gigabyte R261-3C0 User Manual Download Page 56

Page: 56 / 107

BIOS Setup

- 56 -

5-2-9

Network Stack Configuration

(Note) This item appears when

Network Stack

is set to

Enabled

Parameter

Description

Network Stack

Enable/Disable the UEFI network stack.
Options available: Enabled/Disabled. Default setting is

Enabled

Ipv4 PXE Support

(Note)

Enable/Disable the Ipv4 PXE feature.
Options available: Enabled/Disabled. Default setting is

Enabled

Ipv4 HTTP Support

(Note)

Enable/Disable the Ipv4 HTTP feature.
Options available: Enabled/Disabled. Default setting is

Disabled

Ipv6 PXE Support

(Note)

Enable/Disable the Ipv6 PXE feature.
Options available: Enabled/Disabled. Default setting is

Disabled

Ipv6 HTTP Support

(Note)

Enable/Disable the Ipv6 HTTP feature.
Options available: Enabled/Disabled. Default setting is

Disabled

PXE boot wait time

(Note)

Press the <+> / <-> keys to increase or decrease the desired values.

Media detect count

(Note)

Press the <+> / <-> keys to increase or decrease the desired values.

Summary of Contents for R261-3C0












































































































Search results

Summary of Contents for R261-3C0

Reviews:

Related manuals for R261-3C0

Brands by name

Popular brands

Gigabyte R261-3C0, User Manual

Search results

Summary of Contents for R261-3C0

Reviews:

Related manuals for R261-3C0

Brands by name

Popular brands