background image

Copyright

© 2022 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE. 

Changes to the specifications and features in this manual may be made by GIGABYTE without 

prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or 

published in any form or by any means without GIGABYTE's prior written permission.

Documentation Classifications

In order to assist in the use of this product, GIGABYTE provides the following types of documentation:

 

  User Manual: detailed information & steps about the installation, configuration and use of this  

 

 

product (e.g. motherboard, server barebones), covering hardware and BIOS.

  

  User Guide: detailed information about the installation & use of an add-on hardware or 

 

 

software component (e.g. BMC firmware, rail-kit) compatible with this product.

 

  Quick Installation Guide: a short guide with visual diagrams that you can reference easily for  

 

 

installation purposes of this product (e.g. motherboard, server barebones).

Please see the support section of the online product page to check the current availability of these 
documents.

For More Information

For related product specifications, the latest firmware and software, and other information please visit our website at 

http://www.gigabyte.com

For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our reseller 
portal: http://reseller.b2b.gigabyte.com

For further technical assistance, please contact your GIGABYTE representative or visit 
https://esupport.gigabyte.com/ to create a new support ticket

For any general sales or marketing enquiries, you may also message GIGABYTE server directly by email: 
[email protected]

Summary of Contents for R152-P32























































































Reviews: