English
22
0\FRPSXWHUVD\V³&026%DWWHU\/RZ´ZKDWVKRXOG,GR"
If your computer is without power (i.e. unplug the computer
power source from the power outlet and remove the battery
pack from it) for over 45 days, you would lose the information
stored in CMOS.
Please follow the steps below to reconfigure your CMOS
settings:
1. Press F2 to enter into the BIOS setup utility.
6HOHFW ³/RDG 2SWLRQDO 'HIDXOWV"´ :KHQ \RX VHH WKH
following prompt, choose <OK> and then press <Enter>.
6HOHFW ³6DYH &KDQJHV DQG ([LW´ VHOHFW 2.! DQG SUHVV
<Enter> to restart your computer.
+RZWRXQSOXJRUHMHFWGHYLFHV
1.
,QWKHQRWL¿FDWLRQDUHDQH[WWR\RXUWDVNEDUGRXEOHFOLFNWKH
Safe Removal icon. Safe removal displays a list of Plug and
Play devices that support safe removal and that are currently
attached to the system. If you do not see the Safe Removal
icon, your device does not support safe removal, and you
cannot unplug or eject your device using Safe Removal.
2.
,Q6DIHO\DUGZDUHLQWKHOLVWRIGHYLFHVVHOHFWWKH
device that you want to unplug or eject, and then click Stop.
This tells the system that you will be unplugging or ejecting
the device.
,DUGZDUHGHYLFHFOLFN2.
$QRWL¿FDWLRQDSSHDUVVWDWLQJWKDWLWLVQRZVDIHWRXQSOXJRU
eject the device.
Caution
Unplugging or ejecting a device that supports safe removal
without first using the Safe Removal application to warn the
system can cause data to be lost or your system to become
unstable. For example, if a device is unplugged during a data
transfer, data loss is likely. If you use Safe Removal, however,
you can warn the system before you unplug or eject a device,
preventing possible loss of data.
Note
For removable storage devices that can safely be removed
while the system is on, the system disables write caching by
default. It does this so the devices can be removed without loss
of data. When write caching is disable, however, the system
will likely experience slower performance, so be sure to enable
ZULWHFDFKLQJZKHQ\RXKDYH¿QLVKHGUHPRYLQJWKHGHYLFH
