- 16 -
Hardware Installation
LAN and ID Button LEDs
Link/Activity LED
Speed LED
LAN Port
•
When removing the cable connected to a back panel connector, first remove the cable from your
device and then remove it from the motherboard.
•
When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
ID button/LED:
10/100/1000 LAN LED:
State
Description
Yellow On
1Gbps data rate
Green On
100Mbps data rate
Off
10Mbps data rate
State
Description
Blue On
System identification is active
Off
System identification is disabled
10GbE LAN LED:
State
Description
Yellow On
5Gbps, 2.5Gbps, 1Gps data rate
Green On
10Gbps data rate
Off
100Mbps data rate
