Lift the transversal lever /
拉起橫桿
Evenly spread the heat dispersion paste
on the CPU /
將散熱膏均勻塗抹於
CPU
上
Evenly spread the heat dispersion paste
on the CPU /
將散熱膏均勻塗抹於
CPU
上
Lift the
transversal
lever
拉起橫桿
4-4. Connect the connector of the power supply to the power supply socket of the hard
disk drive and floppy disk drive / option device. When you finished, align the disc
drive chassis back with screws. Follow above note.
請將電源供應器上的電源接頭連接到硬碟及軟碟機
/
選購光碟機上的電源插座。當您完成後，
請將磁碟機支架以螺絲鎖回原處。注意事項同前。
Fix the HDD cable to HDD
將硬碟機排線接至硬碟機
Fix the FDD cable to FDD
將軟碟機排線接至軟碟機
Fix the ODD cable to ODD
將光碟機排線接至光碟機
5. CPU /
中央處理器
5-1.
Evenly spread the heat dispersion paste on the CPU and make sure it totally
covers the CPU. Insert the CPU on the CPU socket. Make sure that you have lifted
the transversal lever and aligned the aslant side of the CPU along the aslant side
of the CPU socket.
將散熱膏均勻塗抹在
CPU
上，並確保完全覆蓋住
CPU
。將
CPU
置於主機板上的
CPU
插座。
請務必將橫桿拉起，並將
CPU
斜邊處與
CPU
插座的斜邊處對齊。
A.
For LGA 755 processors /
安裝
LGA 755
處理器
B.
For Socket 478 processors /
安裝
Socket 478
處理器
CPU Pin
Summary of Contents for MB Series
Page 1: ......
